This post may contain affiliate links. If you make a purchase through links on our site, we may earn a commission.
Kia Telluride remote start is a fantastic feature that enhances your car experience, especially during extreme weather conditions. Picture this: it’s a frosty winter morning, and with just a simple push of a button, your Kia warms up, ready and waiting for you. No longer will you have to endure those freezing or scorching initial moments in your car.
Follow our easy, step-by-step guide to master this valuable convenience today and make your Kia Telluride experience even more comfortable and seamless.
JUMP TO TOPIC
- 1 Can I Use the Kia Telluride Remote Start After Replacing the Push Button Start with a Key?
- 2 How to Perform Kia Telluride Remote Start
Can I Use the Kia Telluride Remote Start After Replacing the Push Button Start with a Key?
How to Perform Kia Telluride Remote Start
To remote start your Kia Telluride, first locate your vehicle’s key fob and then lock your vehicle with your key fob, and then press and hold the remote start button for two seconds. Wait for your car to receive the signal and start-up.
1. Locating the Right Buttons on Your Key Fob
Your Kia Telluride’s key fob is more than a keyless entry device—it’s your remote control for a host of functions, among which the remote start stands out. This compact and sophisticated device comprises several buttons, each with its unique symbol and function. It’s like a mini dashboard that you can carry around with you.
The most critical buttons for initiating the Kia Telluride remote start process are the LOCK, and REMOTE START buttons. They are designed intuitively and marked distinctively for easy identification. However, for someone unfamiliar with a key fob, these buttons may seem a bit puzzling initially.
The LOCK button on the Kia Telluride key fob usually bears the iconic symbol of a closed padlock. This button serves the purpose of securing your vehicle remotely, ensuring that all doors are safely locked.
Now, look for the REMOTE START button—it usually has a circular arrow symbol. The circular arrow suggests the cycle of starting the engine. This button is the remote starter, triggering the engine to start from a distance without physical contact with the car.
It is vital to familiarize yourself with these two buttons because, without them, you cannot perform the remote start process. Their identification becomes second nature with a bit of practice, ensuring that you can comfortably start your Kia Telluride remotely even in low light conditions.
2. Locking the Kia Telluride
Ensuring the security of your Kia Telluride is a prerequisite for utilizing the remote start feature. The LOCK button on your key fob is pivotal in this process.
Pressing the LOCK button once engages the Telluride’s integrated locking mechanism, securing all the doors and the trunk. The process is near-instantaneous, providing a significant level of convenience, especially when you’re in a hurry or carrying items.
A distinctive sound—usually a beep or a short horn honk—confirms the vehicle is locked. Additionally, the blink of the headlights offers a visual cue of the successful locking. This auditory and visual feedback is crucial as it guarantees that your vehicle is secure.
Locking the vehicle serves dual purposes: it ensures your vehicle’s security and primes the vehicle for the remote start process. This action is a necessary precondition to activate the remote start function.
Locking your vehicle also has implications for Telluride’s climate control system. By locking the car, you retain the previously set climate control settings, making the remote start feature even more beneficial.
The vehicle gets to start and heat or cool itself while maintaining its secure state. So, before initiating the remote start, always remember to press the LOCK button. A simple, quick action that sets the stage for a smooth, secure, and successful remote start.
3. Activating the Remote Start
Having successfully locked your Kia Telluride, it’s time to perform the main event – activating the remote start. This operation centers around the remote start button on your key fob, which triggers the engine to come to life from a distance.
But don’t be in a hurry to press that button. The remote start button must be pressed and held, not merely tapped. Hold the button for two seconds. This duration is a deliberate design choice to avoid accidental presses that might inadvertently start the engine.
Two seconds might seem negligible, but in the realm of remote starters, this time frame carries significance. It’s a pause that prompts intentionality in the user, making the remote start a deliberate action rather than a casual one.
As you press and hold the button, imagine the invisible radio waves generated by the key fob traversing the space between your hand and the vehicle, ready to wake the sleeping giant that is your Kia Telluride.
4. Wait for the Start
After you’ve held down the remote start button, what comes next is a lesson in patience. You’ve done your part, and now it’s time for your Kia Telluride to respond. This is the waiting phase, a brief period where the vehicle processes the received signal.
You might find this waiting period a bit unnerving, especially if it’s your first time using the remote start. Fear not. Despite the delay, rest assured that your key fob’s signal is en route, travelling through the air to your vehicle’s receiver.
Remember, even in the age of near-instantaneous digital communication, physics still applies. Signal transmission takes time, especially if you’re at the farther end of the recommended 250 feet range.
In this stage, you play the spectator, waiting for your vehicle to affirm the successful receipt of the remote start signal. You will know the transmission is successful when your Kia Telluride’s engine purrs to life, ready to face the journey ahead. So hang tight, and embrace the wait. It’s all part of the remote start experience.
5. Extending the Engine Running Time
The initial running time for your Kia Telluride post-remote start is 10 minutes. This period serves as a temporary warm-up or cool-down phase to prime your vehicle for driving. However, suppose you need to extend this window due to unforeseen delays or if you want your vehicle’s climate control system to operate longer.
In that case, there’s a straightforward solution. The process to extend the running time mirrors the initial remote start activation. Grab your key fob, locate the remote start button, press, and hold for two seconds. This action effectively resets the 10-minute timer, providing an additional running period for your vehicle.
Think of it as hitting the snooze button on your alarm clock, buying your car more time to achieve optimal climate control settings. It’s important to understand the implications of this extended running time.
The additional minutes allow your engine to warm up or your car interior to cool down, making your drive more comfortable from the moment you enter.
Extending the engine running time also ensures your car battery charges more effectively, especially during colder months. However, always remember to use this feature judiciously. Continuous running of your vehicle while stationary should be used sparingly due to environmental considerations and fuel usage.
6. Remote Starting via the Kia Access App
The digital age brings us the luxury of having our lives controlled right from the palm of our hands. Your Kia Telluride is no exception. Kia’s proprietary application, the Kia Access app, grants you control of your vehicle’s remote start feature, straight from your smartphone.
Begin by downloading the Kia Access app from your preferred mobile application store—Google Play for Android users and the App Store for iOS users. After installing, you’ll need to create an account.
This step involves inputting necessary details such as your name, email, and most importantly, your Vehicle Identification Number (VIN).
Upon confirmation, a unique code will appear on your Telluride’s display. Simultaneously, the same code is sent to your smartphone. Confirming these codes links your Kia Access app to your Telluride.
Now, with your smartphone connected, you can lock your vehicle and press the digital remote start button within the app. This process initiates the remote start feature, similar to using your physical key fob, and also comes with the same 500 ft range limit. With this tool in your arsenal, the power to control your Telluride’s remote start is now at your fingertips—literally.
7. Turning off the Engine
Once your Kia Telluride’s engine has been remotely started, it’ll purr away obediently, awaiting your arrival. But what if your plans change? Or what if you accidentally triggered the remote start feature? The solution is as straightforward as starting the engine—by simply pushing a button, you can easily halt the engine.
Turning off the Kia Telluride post-remote start involves the same remote start button you used to bring the engine to life. This button, integral to your Telluride’s remote start system, doubles as a remote kill switch. A firm press and the engine succumb to silence, terminating the remote start session.
The ability to remotely stop your vehicle is as important as starting it. It provides you with the means to control when the engine operates, saving fuel and reducing unnecessary emissions. It also gives you peace of mind knowing you can swiftly rectify an accidental remote start.
Even though it might seem contradictory, this feature reinforces the concept of control that the remote start system embodies. It ensures that your Kia Telluride operates on your terms, whether you want it to start preparing for a journey or to stop and wait for your command.
- How To Start a Car with a Blown Head Gasket? Simple Steps - March 1, 2024
- P0420 Code Toyota: What Are the Causes and How To Fix Them? - March 1, 2024
- Where Are BMW X3 Made and Assembled? A Comprehensive Guide - March 1, 2024