How to Cover a Broken Car Window with Plastic Wrap?

How to cover a broken car window with plastic wrap is a very important thing to learn because not only is a shattered automobile window annoying, but it also poses a safety risk. Glass bits and shards can cause damage to both the driver and passengers.

If you find yourself in this scenario, it’s necessary to cover broken car window until you can get it replaced. Using a wrap of plastic is an efficient and simple option, and we’ll demonstrate how to use a wrap of plastic to hide damaged automobile glass in this post.

How to Cover a Broken Car Window with Plastic Wrap

To cover a broken car window with a wrap of plastic, you have to remove glass pieces, clean window frame, cut a piece of wrap, place it over the broken car window, secure wrap to the frame of the window, and cover the wrap of plastic with saran wrap.

1. Remove Glass Pieces

Remove any residual glass fragments before covering broken car windows with wrap of plastic. While glass shards can be harmful and hurt others if they are not removed correctly, this is an essential step in preventing injury to yourself or others.

Before contacting any glass objects, put on a pair of safety gloves. By doing this, cuts or other injuries that may arise from handling shattered glass will be avoided. Then, clean up any bigger glass fragments that could be on the car’s seat or floor using a dustpan and brush.

Be careful about discarding the glass in a container that can be closed, such as a plastic bag, garbage bag, or cardboard box. Use a vacuum cleaner to get rid of any remaining tiny glass fragments after you’ve taken out the bigger pieces.

Because even the slightest glass fragments might injure someone, be careful not to overlook any locations. Try using a flashlight to highlight any missing pieces if you’re having problems noticing the broken bits.

2. Clean the Window Frame

Cleaning the frame of the window is important because any dirt, dust, or debris on the frame might interfere with the correct adhesion of the plastic wrap. Clear the frame of the window of any dirt or debris first using a clean rag or paper towel.

Use a clean cloth and some rubbing alcohol to get rid of any adhesive residue that may still be present from the prior window tint or decal. This will guarantee a strong bond between the wrap of plastic and the frame.
Next, look for any sharp or ragged edges on the frame of window. Use sandpaper or a file to smooth away any rough locations that might harm the wrap of plastic. Take your time during this stage since the wrap of plastic will attach better if the frame of window is smooth.

Then, use a clean, dry towel to thoroughly clean the frame of window to remove any remaining moisture. The wrap of plastic might come off the frame or fail to adhere correctly if there is any moisture still present.

3. Cut a Piece of Wrap of plastic

The next step is to cut a piece of wrap of plastic to the correct size once the frame of window has been thoroughly cleaned and dried. By doing this, you’ll be able to cover the broken glass and shield the interior of your vehicle from the weather.

Start by selecting a thick-0 of plastic bag or anything of the highest caliber to offer sufficient protection. Next, use a measuring tape to determine the size of the broken car windows. To guarantee that your wrap of plastic will completely enclose the damaged area, be careful to measure the window’s length and breadth.

Then, use scissors or a utility knife to trim the wrap of plastic to the proper size. To allow for some overlap, be sure you cut the wrap of plastic a little bigger than the actual size of the broken window. This will guarantee that the wrap of plastic coverings will cover the damaged glass entirely.

To ensure that the wrap of plastic fits snugly, it might be required to make a special template out of cardboard or paper if the shattered window has an odd form. Just use cardboard or paper as a template to cut the wrap of plastic by tracing the outline of the shattered window onto it.

4. Place Wrap of plastic Over Broken Window

After cutting a piece of wrap of plastic to the required size you have to lay the wrap of plastic over the broken car window. This will temporarily cover against the weather and prevent future damage to your car’s interior. To begin, line the wrap of plastic with the frame of the window.

Assemble the wrap of plastic such that it completely covers the fractured region and overlaps with the frame of window. This ensures that the wrap of plastic sticks securely and adequately protects. If there are any creases or bubbles in the wrap of plastic, smooth them out with your hands.

This ensures that the wrap of plastic adheres correctly and forms a tight seal. Lastly, remove any excess wrap of plastic from the frame of the window’s edges using scissors or a utility knife. This will make your temporary car window cover seem sleek and tidy.

5. Secure Wrap of Plastic to the Frame of the Window

The following step is to attach it to the frame of window. This will keep the wrap of plastic in place and give appropriate protection from the weather. To begin, adhere the wrap of plastic to the frame of window with duct tape or masking tape.

Begin at one corner of the window and work your way around the perimeter, pressing hard on the frame of window as you go. To establish a firm grip, apply the tape to both the top and bottom of the wrap of plastic. Apply tape strips to the frame of window’s sides next.

Begin at the top corner of the frame and stretch the tape firmly as you move in a diagonal line. Duplicate this process on the other side of the frame. Next, stretch strands of tape securely over the center of the frame of window to guarantee a strong grip. For increased security, apply the tape to both the inside and outside of the frame of window.

6. Cover Wrap of Plastic with Saran Wrap

The plastic must now be covered with a layer of wrap of saran. This will assist in protecting the wrap of plastic from scratches and rips, as well as from wind and rain damage. To begin, cut a piece of crash wrap somewhat larger than the wrap of plastic you’ve used to cover the shattered glass.

Spread the wrap of saran over the wrap of plastic, being sure to cover the whole surface area. Next, bind the wrap of saran edges to the frame of window using tape. Begin at one end of the window and run a straight line of tape over the top of the wrap of saran, pushing firmly against the frame of window.

Duplicate this procedure on the bottom of the frame of window. Apply tape strips to the frame of window’s sides next. Begin at the top corner of the frame and stretch the tape firmly as you move in a diagonal line.
Duplicate this process on the other side of the frame. Next, stretch strands of tape securely over the center of the frame of window to guarantee a strong grip. For increased security, apply the tape to both the inside and outside of the frame of window.

7. Paint Over Wrap of plastic (Optional)

You have the option of painting over the wrap of plastic to conceal your temporary window repair. If you don’t want the wrap of plastic to be visible from the exterior of the automobile, this step is optional but handy.

Selecting a car paint that complements the color of your automobile is the first step. The paint can be purchased online or at an auto supply store. Be sure you pick a paint that is intended for use on automobile exteriors since it will be more resilient to wear and the elements than other kinds of paint.

Make sure the wrap of plastic is thoroughly dry and clear of any dirt before painting. Clear the wrap of plastic of any dust or grime by wiping it down with a clean cloth or towel. Use a paintbrush or sponge to next apply a light coat of paint on the wrapping plastic. To completely cover the wrap of plastic, be sure to properly distribute the paint.

To get the correct degree of coverage, you might need to apply additional coats of paint. Before driving or rolling down the window, let the paint completely dry. Depending on the kind of paint you’re using and the weather, this might take a while.

Conclusion

Now that you know how to cover a broken car window with plastic wrap it will protect both you and your vehicle.

Here is a summary of what you have learned:

• To prevent injuries and damage to the interior of the automobile, remove any shards of shattered glass from the frame of window as soon as possible.
• For the wrap of plastic to fit snugly, clean the frame of window with a rag or cloth.
• Using duct tape or masking tape, cover the shattered glass with a piece of wrap of plastic that has been cut to size.
• For an optional step, you may cover the wrap of plastic with saran wrap or paint it to mix in with the car’s exterior.

Always use gloves and use caution while handling glass to prevent injuries. You can protect yourself and stop future harm to your automobile with what you have learned here.