Ram 1500 Air Suspension Reset: How To Do This With Ease?

Knowing about Ram 1500 air suspension reset is critical information for many car owners, as this system is specifically designed to provide a comfortable ride and can adjust to different driving conditions, but there may be instances where it needs to be reset. If you are experiencing any suspension problems with your Ram 1500 system, resetting it may be the solution, and you should know that this is a relatively straightforward process.

Ram 1500 Air Suspension Reset

In this complete article, we will provide a comprehensive guide on resetting the Ram 1500 air suspension system. Not only that, but our car team will also review all the signs that indicate the need to reset the system, the steps involved in resetting the system, and some additional tips to help you ensure that the air suspension system is working correctly!

How Do You Reset the Ram 1500 Air Suspension System?

You can reset the Ram 1500 air suspension system by first switching off the truck engine, and then you need to open up the hood where the relevant control module is. Then you need to disconnect the battery, wait for 30 minutes, and reconnect it.

1. Turning off the Engine

To reset the air suspension system in any Ram 1500, the first step is to turn off the car’s engine and remove the key from the ignition. This will ensure that no power goes to the air suspension system, which is essential for a safe and successful reset.

This step will also prevent any potential injury from tampering with the air suspension system while the power is still on.

2. Opening the Hood

After turning off the vehicle engine and removing the key, the next step to reset the air suspension system in your Ram 1500 is to open the truck hood and locate the air suspension control module. Typically, the control module is on the engine compartment’s passenger side.

Opening Hood of Ram 1500

Identifying the control module’s exact location is important to ensure you reset the correct module and avoid any damage to the system. With this step complete, you can move on to the subsequent steps and reset your air suspension system safely and effectively.

3. Disconnecting the Battery

Disconnecting the car battery before resetting the air suspension system in your Ram 1500 is crucial. This is to ensure that no power flows into the system, which can lead to damage or injury. To disconnect the battery, you can use a wrench to remove the car’s negative cable from the battery. This step is an essential safety measure and should be noticed to avoid potential harm.

4. Reconnecting the Battery

Once the 30-minute waiting period is over, it’s time to reconnect the negative cable to the battery before resetting the air suspension system in your Ram 1500. This step is crucial to ensure the system has the power to reset correctly.

While reconnecting the cable, ensure the connection is tight and secure to avoid any loss of power or potential damage to the system.

Reconnecting Ram 1500 Battery

A secure connection is vital to ensure the successful resetting of the air suspension system and avoid any potential issues arising from a loose connection.

5. Turning on the Engine

With the battery reconnected, the final step is to turn on the car engine and allow the air suspension system in your Ram 1500 to recalibrate. The system will adjust to the correct ride height and overall performance settings during this process.

While the recalibration may take a few minutes, you will notice a difference in your truck’s performance, and it should ride more smoothly than before. This step is essential to ensure the air suspension system is reset and functioning optimally. Let the system recalibrate completely to avoid any potential issues.

How Do You Reset the Ram 1500 Air Suspension With a Diagnostic Tool?

You can reset the Ram 1500 air suspension with a diagnostic tool by purchasing the appropriate tool and looking for the diagnostic connector. Next, turn on the ignition and perform a scan to identify the error codes and promptly clear them.

1. Getting a Diagnostic Scanner Tool

The first step in resetting the Ram 1500 Air Suspension with a diagnostic scan tool is to purchase a compatible scanner tool. Ensure that the scanner tool can communicate with the air suspension control module in the Ram 1500. Several scanner tools are available in the market, and it is important to choose one that is reliable and has good reviews from other users.

2. Locating the Diagnostic Connector

The next action step is to locate the diagnostic connector in the Ram 1500. The diagnostic connector is usually located under the steering column and can be easily accessed by removing the plastic cover. Once you have located the diagnostic connector, connect the scanner tool to the connector. Ensure the connector is properly connected to the scanner tool to avoid any issues during scanning.

3. Turning on the Ignition

Before proceeding with the scanning process, it is important to turn on the ignition. This will allow the scanner tool to communicate with the onboard computer system and access the air suspension control module. Once you have turned on the ignition, follow the instructions provided by the scanner tool to access the air suspension control module.

4. Scanning for Error Codes

Once you have accessed the air suspension control module, scan for any error codes or faults that may be causing the suspension system to malfunction. The scanner tool will provide a list of error codes or faults; you can clear them by following the instructions provided by the scanner tool.

Scanning for Car Error Codes

Ensuring that all error codes or faults are cleared is important to ensure that the air suspension system is fully reset.

5. Testing the System

After clearing all error codes or faults, test the air suspension system by driving the Ram 1500. Check whether the system is functioning correctly and whether the ride is smooth and comfortable. If you notice any issues with the air suspension system, repeat the scanning process to ensure that all error codes or faults are cleared.

How To Know If You Have To Reset the Air Suspension System?

You can know if you have to reset the air suspension system by noting how your truck sits. If it seems to be lower or higher than normal, this could be an indicator. Another area to pay attention to will be if the rides seem bumpier than usual.

  • The Truck Sitting Oddly

As a Ram 1500 owner, paying attention to the signs indicating the need to reset your truck’s air suspension system is important. One of the most common signs is when the truck sits lower or higher than usual. This can result from a malfunction in the system that can be fixed by resetting it.

  • Bumpy Rides

Additionally, suppose you notice that the ride is bumpier, more uncomfortable than usual, or the compressor is running more frequently. In that case, this may also indicate a need for a reset. By resetting the air suspension system, you can ensure it is functioning correctly and provide you with the smooth and comfortable ride you expect from your Ram 1500.

Bumpy Rides Car Suspension System

So, if you happen to notice any of these signs, it is best to take action and follow the steps to reset your air suspension system.

Is Resetting the TPMS on a Ram 1500 Similar to Resetting the Air Suspension?

Resetting the TPMS on a Ram 1500 is a different process than resetting the air suspension. While resetting TPMS after new tires involves locating the reset button and following specific steps outlined in the vehicle’s manual, resetting the air suspension requires accessing the control module and navigating the settings menu. Therefore, these two procedures are not similar.

Conclusion

By following the elaborate steps outlined in this detailed guide, you should be able to reset the Ram 1500 air suspension system and ensure that it is working correctly. We hope you remember that it is important to observe the signs that indicate the need for a reset and to follow the correct instructions,

as given in the article, to avoid damaging the system:

  • Signs that indicate the need to reset the air suspension system include the truck sitting lower or higher than usual and bumpier rides.
  • To reset the air suspension system, turn off the engine and disconnect the air suspension control module’s battery.
  • After waiting 30 minutes, reconnect the battery and restart the engine.
  • Resetting this system with a diagnostic tool requires plugging the tool into the OBD-II port and following the manufacturer’s instructions.

As a Ram 1500 owner, keeping your truck’s air suspension system in good working condition is essential to ensure a smooth and comfortable ride. We sincerely hope that this article has delivered you all the necessary knowledge to reset the system when needed, but remember that if you continue to experience issues with the air suspension system, it may be time to take your truck to a certified mechanic for further inspection!

5/5 - (15 votes)
Ran When Parked