Learning how to reset oil life on Jeep Cherokee is one of the easiest things. All you need is to switch the vehicle to the “Run” mode by pressing the Start/Stop button twice with your foot off the brake, slowly press the accelerator to the floor three times in a row, turn off the vehicle, and you’re all set!
Check out the detailed steps below. Also, our guide will give you practical tips to maximize your Cherokee’s oil life; keep reading.
Contents
How To Reprogram the Maintenance Minder on a Jeep Cherokee?
To reprogram the maintenance minder on a Jeep Cherokee, press the Start/Stop button twice to turn on the electronics, not the engine. Press the accelerator to the floor three times, successively, and then turn off the vehicle. The maintenance minder is now reprogrammed!
The Jeep Cherokee has a useful feature that eliminates the guesswork regarding when the vehicle requires an oil change. When it’s time to change oil, you’ll see your Jeep Cherokee oil change required message on the cluster display. Changing the oil is essential for the vehicle to remain in peak condition. If you’ve changed the oil by yourself, you must reset the engine oil change indicator.
That will enable the system to give you accurate oil readings in the future, which should happen every 3,000 to 5,000 miles. As briefly explained above, the procedure is straightforward, regardless of your Cherokee’s manufacture year. So, let’s get into the details on how to reset oil life on Jeep Grand Cherokee (or Trailhawk). Here are the detailed steps:
1. Switch the Vehicle to the “Run” Mode
To learn how to reset oil change on Jeep Compass, Wrangler, or Cherokee, begin you begin, make sure you’ve engaged the “Park” gear – push the gear stick to the “P.” Next, without your foot on the brake, press the “Start/Stop” button so the vehicle will switch to the “ON/RUN” position. That means the engine is off, but the dashboard lights (vehicle electronics) are on.
2. Slowly Press the Accelerator Thrice
With the instrument cluster lit up, press the gas pedal slowly to the floor. Similarly, release the pedal and fully depress it two more times. Ideally, you should depress the accelerator pedal three times in about 10 seconds – three seconds per depression.
3. Turn the Ignition Off
Press the “Start/Stop” button again to turn off the electronics. You have completed the Cherokee oil life reset process. When you start the engine, the oil change message will disappear, and the system will work how it should.
You can complete the procedure using the navigation buttons on the left-hand side of your steering wheel. Once you complete step one above, use the arrow buttons to scroll and stop at the “Vehicle Info” sub-menu. You’ll now scroll to the right until you see the remaining Jeep Grand Cherokee oil life percentage.
While the life percentage is displayed, hold the “OK” button until the system resets to 100 percent (you should see a message confirming the same on display). Switch off the ignition, and you’ll not see the maintenance notification the next time you start the engine. Both methods are reliable, and you can choose, depending on your preference, and reset oil light Jeep Cherokee 2015 or any other model year.
For those asking “how to reset oil life on Jeep Cherokee Trailhawk?”, the steps above are also applicable. If you face any problems during the reset procedure, don’t panic. Just turn off the engine and repeat the steps. And if the “oil life won’t reset Jeep Cherokee,” please consult your owner’s manual or contact a professional.
How To Maintain Maximum Oil Life on a Jeep Cherokee?
To maintain maximum oil life on a Jeep Cherokee, follow the vehicle’s manufacturer’s recommendations on the ideal motor type and change interval. You should also check the oil level and top it off as needed. Other practical tips include replacing the filter regularly and keeping the engine clean.
In case you’re wondering, oil life is the distance the oil can support the engine before it breaks down. The onboard computer monitors different factors, including time, mileage, and driving conditions, to determine the ideal time to change the oil.
Other factors that affect the life of your oil are the type, quality, and how frequently you drive the vehicle. As mentioned, you’ll need to change the oil on your Jeep Cherokee after 3,000 to 5,000 miles from the last change. But like any other car maintenance, changing the oil isn’t something anyone often wants to do. So, here we give you the details of the tips mentioned above to extend the life of your Jeep’s oil:
-
Change the Oil on Time
Changing your vehicle’s oil on time will save you from a lot of trouble and extend the life of the next oil. If you do the changing too late, the oil filter may have already collected a lot of dirt and debris. And if you fail to also replace the filter, your oil will become dirty and less effective sooner.
Thus, follow the manufacturer’s recommendations regarding the oil changing interval. As stated, your Jeep Grand’s oil monitor will prompt you for new oil after 3,000 to 5,000 miles.
-
Use High-Quality Oil
You can’t just use any oil on your Jeep. Use a high-quality one that meets the engine’s specifications. The exact oil for your engine depends on the vehicle’s manufacture year, engine type, and trim level. For a 2022 Grand Cherokee, you have a 3.6L V6 or a 5.7L Hemi V8 engine.
The former will require 0W-20 synthetic while the latter will require 5W-20 synthetic oil. Top-notch oils are long-lasting. That is, while ordinary oil will last between 3,000 and 5,000 miles, synthetic can cover between 7,500 and 10,000 miles. It’s a high mileage oil!
Note that you can often find the type and grade of oil your engine needs on the oil cap. The information will also be available in your owner’s manual.
-
Check Oil Level and Top Off if Necessary
You need to regularly check and top up the oil to extend its life. With the engine off, pop the hood and locate the dipstick. Pull it out and wipe any oil on it using a clean piece of cloth. Next, insert it back into the tube, pushing it fully inside. Remove it and check the level. If it’s below the circle, it’s a little low and needs you to top it up.
-
Check and Replace the Oil Filter Routinely
You don’t necessarily need to replace your oil filter each time you change the oil. The filter can last up to 10,000 miles. However, please note that when you change the oil, it’s never removed totally. Some are left in the sump and on the internal surfaces.
Therefore, not changing the filters (regularly) means that your new oil gets contaminated way too quickly. Ensure you follow the vehicle’s manufacturer’s recommendations regarding filter replacement. Typically, it would be best to change it every second time you change the oil.
-
Keep the Engine Clean
Cleaning your engine is as important as cleaning the car’s exterior. A clean engine runs smoothly due to having less dirt and debris contaminating the oil and blocking the various oil passages. Typically, if you live in an area (city or urban) with little debris on the roads, you should clean your car’s engine at least twice per year.
But cleaning the engine at least once every three months is recommended if you frequently drive on roads with dust. It prevents the dust from accumulating in the engine bay and contaminating the oil.
-
Avoid Driving the Jeep in Extreme Conditions
As mentioned, your Cherokee’s oil monitor considers the driving conditions while determining when you should change the oil. Thus, extreme conditions like very cold or hot weather and heavy traffic will impact the life of the oil. When driving in hot weather, the oil circulates through the engine and gets thin as it reacts with the heat.
Once that happens, some engine parts won’t receive sufficient lubrication. And during the cold weather, motor oil thickens. That means it flows more slowly through the various engine parts and ineffective does its job. Moreover, a more viscous lubricant is harder to pump, which strains the battery.
-
Avoid things That Strain the Engine
Overloading your Jeep Cherokee or towing heavier than the recommended weight is bad for your engine and oil. Also, your driving habits contribute greatly to motor oil life.
Aggressive driving (such as hard braking and rapid acceleration) strains the engine and oil. The more you strain the engine, the faster the motor oil’s lubricating property deteriorates.
Frequently Asked Questions
– How Can You Reset the Jeep Renegade’s Oil Indicator?
To reset the Jeep Renegade’s oil indicator, turn the vehicle to “Run” mode. Next, you’ll depress the accelerator fully to the floor in three rapid successions. After that, switch off the ignition and turn the engine back on to confirm that the light is reset.
– How Do You Reset the Jeep Cherokee Trailhawk Oil Monitor?
To reset the Jeep Cherokee Trailhawk oil monitor, use the arrow buttons on the left-hand side of the steering wheel. Navigate to the “Vehicle Info” sub-menu and scroll until you find the oil life option. Hold the “OK” button until the light resets to 100 percent.
Conclusion
As you’ve learned from our guide, resetting the oil monitoring system on a Jeep Grand Cherokee is as easy as ABC.
Here’s a summary:
- The easiest way to reset the oil monitor is to turn on the vehicle electronics, give the accelerator three slow, successive depressions, then switch off the car.
- You can also reset the system using the buttons on the right-hand side of your steering wheel.
- Practices like regular changing of motor oil and routine replacement of the oil and air filter can increase the life of the oil significantly
- Avoiding driving habits that put a strain on the engine.
Now you’ve got the information you need to get this task done (you can also use the steps above to learn how to reset oil life on Jeep Wrangler. So, sit on the Grand Cherokee’s driver’s seat and reset that system!
We love what we do, and it shows in everything we do and more. We share our knowledge, here on Ran When Parked.
- What Causes a Car to Sputter While Driving & How to Fix It - September 26, 2023
- Rack and Pinion Leak: Common Causes and Their Solutions - September 25, 2023
- Subwoofer Stopped Working But Amp Is On – Causes and Fixes - September 24, 2023