Opening the hood of a Jeep Renegade might seem like a simple task, but sometimes it can be tricky. To open the hood, locate the interior hood release lever near the driver’s side footwell and pull it. This action will release the primary latch.
Next, walk to the front of the vehicle. Feel under the center of the hood for the safety latch. Raise the latch to fully lift the hood. At some points, applying a bit of force might help, especially if the hood is sticking. Don’t worry, you won’t break it!
Once the hood is up, make sure it stays securely open. The hood might be heavy, so be prepared for that. Keep an eye on the hydraulic struts as they should hold the hood in place. And now, we can access the engine bay 🛠️ and get to work!
JUMP TO TOPIC
How To Open Jeep Renegade Hood
Opening the hood of a Jeep Renegade is simple. First, locate the hood release lever inside the cabin. It’s usually on the lower left side of the dashboard, near the driver’s side door. Pull it firmly. You’ll hear a pop, indicating the hood has released.
Next, move outside to the front of the SUV. Reach under the center of the grille and feel for the secondary latch. Sometimes, finding this latch can be tricky. If you struggle, a flashlight might help. Push the latch to one side and lift the hood simultaneously.
Once the hood is open, secure it with the prop rod. Look for this rod on the passenger side. Slot the end of the prop rod into the designated hole on the underside of the hood to keep it open.
With the hood up, you can see various components of the engine compartment. Here’s a quick overview:
| Component | Location | Icon |
| Battery | Front right | 🔋 |
| Coolant Reservoir | Front left | 🌡️ |
| Air Filter | Center rear | 💨 |
| Oil Dipstick | Front center | 🛢️ |
For maintenance tasks like checking the oil or topping off fluid reservoirs, follow the vehicle’s manual. Make sure to use the recommended types for fluids and oils.
If the hood latch gets stuck, try pulling the interior latch and gently tapping the hood near the latch to release it. This trick can sometimes free it up without needing a trip to the dealer or specialized tools.
This method applies to various Renegade models, including the 2016 Jeep Renegade. Opening the hood is a basic yet essential skill for any vehicle owner, especially for compact SUVs like the Renegade.
Safety Precautions
When working on our Jeep Renegade, safety is our top priority.
First, make sure the car is parked on a flat surface. We don’t want any unexpected rolls.
To avoid burns, let the engine cool down before opening the hood. Engines can get very hot!🌡️
Never stick our hands near moving parts. Engine belts and fans can cause injuries.
⚠️ A Warning
Don’t forget to disconnect the car battery if we plan on doing any electrical work.
It’s always good to keep tools and parts organized. This way, we don’t trip over anything.🛠️
When lifting the hood, always use the support rod. It keeps the hood in place to prevent it from falling.
If we’re unsure about something, it’s best to seek professional advice. Safety first!🚨
Stay alert and focused. Distractions can lead to mistakes.
Lastly, always wear protective gloves and eyewear. Safety gear can prevent accidents.
These steps may seem simple, but they make a huge difference in keeping us safe!
Locating The Hood Release Latch
To open the hood of a Jeep Renegade, we need to find both the interior and exterior hood release latches. The interior latch is usually found under the dashboard, while the exterior latch can be accessed once the hood is slightly open.
Interior Hood Release
The hood release lever is found under the driver’s side dashboard. It’s often marked with a hood icon. To find it, we need to sit in the driver’s seat and look under the lower left section of the dashboard.
Once located, we can pull the lever to partially release the hood. This action disengages the primary latch and allows us to access the hood from the outside. If the hood doesn’t pop up slightly when we pull the lever, there might be an issue with the release cable. In such a case, we might need to apply a bit more force or check if the cable is stuck or broken.
Tip: If the lever feels loose and the hood doesn’t move, it’s possible the cable is disconnected inside. This might require a more detailed repair.
Exterior Hood Release
After using the interior hood release, we need to move to the front of the Jeep. The exterior hood release can be tricky to find, especially if it’s your first time. Standing in front of the Jeep, gently lift the hood a little and look for a latch mechanism usually near the center.
Once the hood is slightly open, we will slide our hand under the hood to find the safety latch. We need to push this latch toward the passenger side to fully open the hood. It’s a good idea to use both hands to lift the hood once the safety latch is released, as it can be heavy.
If done correctly, the hood will lift open, revealing the engine compartment where we can perform our checks or maintenance tasks.
We love what we do, and it shows in everything we do and more. We share our knowledge, here on Ran When Parked.
- Best Exhaust Tip for Deep Sound: Top Picks for 2025 - May 3, 2025
- Best Clear Coat for Headlights Reviewed: Top Picks for Enhanced Visibility - May 3, 2025
- Best Car Coffee Table Books for Auto Enthusiasts - May 3, 2025