Blind Spot Monitoring on Jeep Cherokee: Turning It On

This post may contain affiliate links. If you make a purchase through links on our site, we may earn a commission.

Turning on the blind spot monitoring on Jeep Cherokee is vital to learn because it is an important safety element in modern automobiles. This device detects other vehicles in your blind areas and alerts you if you try to change lanes or make a turn.

Blind Spot Monitoring on Jeep Cherokee

However, some of you may find it hard to determine how to turn this feature on. We will teach you how to activate blind spot monitoring on your Jeep Cherokee in this step-by-step guide so that you may drive more securely and confidently.

How Can You Turn on Blind Spot Monitoring on Jeep Cherokee?

To turn on blind spot monitoring on Jeep Cherokee, you have to understand how the system works, locate the blind spot monitoring button, turn on the sensor, use the blind spot sensor as necessary, and finally learn about additional safety features.

1. Understand How Blind Spot Monitoring Works

Blind spot monitoring is a safety feature seen in current automobiles such as the Jeep Cherokee and Grand Cherokee. This device detects cars in your blind areas and warns you if you try to change lanes or turn.

Monitoring Blind Spot

Before you enable blind spot monitoring on your car, you must primarily understand how it works. These sensors detect the presence of other cars on the road by using radio waves or radar. When a vehicle is detected in your car’s blind spot, the useful system will notify you by turning on an indicator light in your side mirror or on the dashboard.

Until the car departs your blind zone, the indicator light will blink or remain lighted. Some cars may also generate an audio alarm, such as a beep or chime, to notify you of the proximity of another vehicle.

Blind spot monitoring can also be combined with additional safety features like Lane Departure Warning and Forward Collision Warning. Sensors and cameras are used in these systems to identify if you are drifting out of your lane or approaching another vehicle too rapidly.

These safety measures, when combined, provide an additional degree of protection when driving. It should be noted that blind spot monitoring is not a replacement for safe driving techniques. Before changing lanes or turning your vehicle, always check your side mirrors and activate your turn signal.

2. Know the Benefits

One of the most important advantages of blind spot monitoring is that it improves situational awareness. This safety feature allows you to instantly identify cars hiding in your blind zones. This reduces the need to constantly crane your neck to see whether there are any cars in front of you, allowing you to heavily focus on driving and boosting your response time to any risks on the road.

Another advantage of blind spot monitoring is that it reduces the possibility of accidents. The safety function is intended to warn you if a vehicle is located in your blind spot, preventing you from performing risky lane changes or maneuvers that might lead to a crash. As a consequence, you, your passengers, and other drivers will have a safer driving experience.

Blind spot monitoring can also aid in the prevention of vehicle damage. You are less likely to crash with other cars, walls, or other obstructions in your blind area if you have this safety feature. As a result, you may save cash on repairs and avoid submitting insurance claims, which might boost your premiums.

Finally, blind spot detection can improve your driving experience. When this safety function is activated, you can concentrate on the road and enjoy a more comfortable, stress-free driving experience. This is especially useful on long travels, allowing you to arrive at your destination safe, as well as feeling rested and rejuvenated.

3. Locate the Button To Turn It On

The blind spot monitoring button is often positioned on the dashboard or the steering wheel, however, the precise location may differ based on the model and year of your car. Begin by glancing at the dashboard on the driver’s side of your car to locate the correct button.

Blind Spot Monitoring Button

Look for a button with an icon that looks like two automobiles side by side with a dotted line connecting them. This is the standardized sign for blind spot monitoring and is seen in the majority of automobiles. Check the steering wheel if you can’t find the specific button on the dashboard.

The blind spot monitoring button is built into the steering wheel controls on some Jeep Cherokee and Jeep Grand Cherokee models. Look for a button with the same symbol as the dashboard button, which is normally found on the right side of the car steering wheel. If you are still unable to locate the specific button we are talking about, see your vehicle’s user handbook for detailed directions.

The owner’s handbook should also provide explicit instructions for activating and deactivating the blind spot monitoring function. It should be noted that not all Jeep Cherokee and Jeep Grand Cherokee models include this useful function.

4. Add Blind Spot Monitoring (If Not Yet Installed)

If your Jeep Cherokee or Jeep Grand Cherokee does not come standard with blind spot monitoring, you may be able to add this safety feature aftermarket. Adding the sensor to your car can assist enhance your driving experience and boost your road safety.

You must purchase and install a blind spot monitoring system from a reputable dealer or installer to add it to your Jeep Cherokee or Jeep Grand Cherokee. These systems usually include sensors installed on the back bumper and side mirrors, as well as a display device mounted on the dashboard or in the rearview mirror.

The installation method may differ based on the type of blind spot monitoring system you purchase and the make type and model of your car. In general, the installation is attaching the sensors, connecting the system to your vehicle’s electrical system, and routing wires to the display unit.

It is critical to have the system professionally installed to guarantee that it is properly installed and running effectively. It is critical to explore and evaluate several choices before purchasing a blind spot monitoring system to locate the best resolution for your needs and budget.

Look for a system that is highly compatible with your vehicle’s make and model, as well as one that has received positive feedback and ratings from other users.

5. Turn On the System

It is simple to activate the blind spot monitoring system. Start your Cherokee and put it in park mode. On your dashboard or center console, look for the specific button we mentioned above. To activate the system, press the blind spot monitoring button. The system is now on, and you will be notified whenever a vehicle enters your blind area.

Activating Monitoring System

Additional settings or features may be available on some blind spot monitoring devices. Some systems, for example, may allow you to change the sensitivity of the sensors or the volume of the warnings.

6. Use the Sensor as Necessary

Make sure to learn how to utilize the system efficiently to improve your driving experience and remain safe on the road. When another vehicle is detected in your car’s blind spot, the blind spot monitoring system will usually notify you visually or audibly.

Pay heed to these warnings and take proper action to avoid a collision. While blind spot monitoring might be useful, it is still necessary to check your mirrors and blind areas before changing lanes or merging.

Blind spot monitoring is not a replacement for safe driving habits. Although the sensor can assist and warn you about cars you may have missed, it is still crucial to be aware of other vehicles on the road and drive carefully.

7. Learn About Additional Safety Features

Other safety features that your Jeep Cherokee or Jeep Grand Cherokee may have, in addition to blind spot monitoring, can assist you in improving your driving experience and also keep you safe on the road.

Safety Features on Jeep

Park Assist detects barriers while parking and can send notifications to help you park securely. When backing up, the ParkView® Rear Back-Up Camera gives a wide-angle view of the area behind your car.

By automatically altering your speed, Adaptive Cruise Control can assist you in maintaining a safe following distance from the current vehicle in front of you. Forward Collision Warning detects possible collisions using sensors and can send notifications to help you avoid a collision.

Conclusion

Now that you have covered our guide on blind spot monitoring on the Jeep Cherokee, you can drive more securely and confidently.

Summing up the key concepts we’ve covered:

  • Blind spot monitoring has several advantages, including better safety, increased awareness, and fewer accidents.
  • Drivers must find and activate the function’s button in a Jeep Cherokee or Jeep Grand Cherokee to use it.
  • If the car does not already have blind spot monitoring, it may be possible to add it as an aftermarket option.
  • Drivers may benefit from various safety technologies like Park Assist, Adaptive Cruise Control, and others in addition to blind spot monitoring.

Finally, blind spot monitoring is a critical safety function that may assist you in avoiding accidents with other cars while driving. Always adopt safe driving habits and review your vehicle’s owner’s handbook for extra safety features.

5/5 - (15 votes)
Ran When Parked