Taking the doors off a Jeep Wrangler can transform your driving experience, making it perfect for those warm summer days or off-road adventures. From our own outings with the Rubicon, we’ve found that nothing beats the wind in your face and the open road. Removing the doors might sound tricky, but with a few tools and our step-by-step guide, you’ll have it done in no time. 🛠️
Before we get started, make sure you have all the necessary tools like a 13-millimeter socket and wrench. And don’t worry; this process is pretty much the same whether you have a 2016 Jeep Wrangler or a newer 2022 model. Remember, safety first—secure your Jeep on a flat surface and be cautious when moving those heavy doors. 💡
Once you’ve taken off the nuts and disconnected the wiring harness near the B-Pillar, you can lift the door out gently. Tuck the wiring back neatly and store your doors in a safe place to avoid any damage. Whether exploring a mountain trail or cruising to the beach, removing the doors on your Jeep Wrangler adds an element of freedom to your ride. 🚗💨
JUMP TO TOPIC
How To Take Doors Off Jeep Wrangler
Taking the doors off your Jeep Wrangler is a task many owners eventually want to tackle. Let’s go through the steps together.
1. Gather Your Tools
You’ll need a 13mm socket and wrench. If you’ve got power doors, have a screwdriver handy for the wiring harness clips. 🛠️
2. Roll Down Windows and Remove Nut Caps
Roll your windows down. This helps to handle the doors easier. Now, remove the nut caps from the door hinges using your 13mm socket.
3. Disconnect Wiring and Door Straps
If you have power doors, slide the seats forward to access the wiring harness on the B-Pillar. Unclip the harness carefully. Then, remove the door straps which keep the door from swinging too wide.
4. Remove Door Bolts
Two bolts hold each door. Use your wrench to unscrew them.
| Step | Tool Needed |
| Remove Nut Caps | 13mm Socket |
| Disconnect Wiring | Screwdriver |
| Remove Door Bolts | Wrench |
5. Lift and Store Doors
With everything disconnected, lift the door straight up. Store them somewhere safe to avoid scratches.
6. Reassemble When Done
When putting the doors back, follow the steps in reverse. Make sure all bolts and wires are secured.
Enjoy your doorless adventure! 🌄
Necessary Tools And Preparation
Before taking off the doors of your Jeep Wrangler, we need to gather the correct tools and prepare the vehicle properly. Let’s break it down step-by-step to ensure a smooth process.
Gathering Tools
First things first, we need to get our tools ready. Here’s a list of what we’ll need:
* Torx T50
* Ratchet
* Panel carrier
* **Optional:** Rubber mallet, if bolts are tough
The Torx T50 is essential for removing the door bolts. A good ratchet will make the job easier. For lifting and carrying the door, a panel carrier can be handy, but it’s not necessary.
If the bolts are stuck, a rubber mallet can help loosen them without causing damage. Keep everything close at hand to avoid multiple trips back to the toolbox.
Preparing The Vehicle
Now, let’s prep the Jeep.
- Windows: Drop the windows down. It makes the door lighter and safer to handle.
- Wiring: Locate the wiring harness under the instrument panel. Push the red clip up, then lift and pull out the harness.
- Door Straps: Unhook door straps by sliding them off their mounts.
Be careful not to damage the wiring! It can be costly to repair.
- Bolts and Nuts: Use the Torx T50 to unscrew the door bolts. There might be two or more bolts per door.
- Safety First: Make sure the Jeep is stable, perhaps on level ground or with the wheels chocked.
Each step ensures our Jeep is ready for door removal. It might sound like a lot, but with practice, it becomes second nature. 🚗🅿️
Step-By-Step Guide
Taking off the doors of a Jeep Wrangler involves several steps. This process includes removing the side mirrors and door straps, disconnecting electrical connections, and lifting the doors off their hinges. Let’s walk through these steps.
Removing The Mirrors
First, let’s tackle the side mirrors. If you have manual mirrors, simply unscrew them. For powered mirrors, ensure the vehicle is off.
Steps:
- Fold down the mirrors to get better access.
- Remove the mounting bolts using a wrench.
- Carefully lift the mirrors off to avoid scratching the paint.
🔧 Pro Tip: Place the mirrors in a safe spot to prevent any damage.
Detaching The Door Straps
Now, we focus on the door straps. These straps hold the door in place when it’s open. They’re crucial, especially for front doors.
Steps:
- Open the door slightly to release tension on the strap.
- Locate the strap near the bottom hinge.
- Unhook the strap by lifting and pulling outwards.
🚪 Pro Tip: Keep the doors supported to avoid stress on the hinges after detaching the straps.
Disconnecting Electrical Connections
Next, we need to disconnect the electrical components. These wires control the power locks, windows, and mirrors.
Steps:
- Locate the footwell area under the dashboard or near the B-pillar.
- Find the wiring harness connected to the door.
- Release the connecting clip and gently disconnect the wires.
⚙️ Pro Tip: Label each wire to make reconnecting them easier.
Lifting Off The Doors
Finally, it’s time to remove the doors. This step requires care to avoid damaging the vehicle.
Steps:
- Unbolt the door hinges using a socket wrench.
- Lift the door upwards by holding it firmly.
- Move the door away from the Jeep and place it in a safe storage area.
🛠️ Pro Tip: Enlist a friend’s help to lift the doors, especially if they feel heavy.
Always make sure to support the weight of the doors when removing them to prevent damage to the hinges or body of the Jeep.
By following these steps carefully, we can successfully remove the doors of a Jeep Wrangler. 🌟
Safety And Maintenance Tips
When taking off the doors of your Jeep Wrangler, it’s vital to handle them with care and store them properly. Following these tips ensures that your doors remain in good condition and you stay safe during the process.
Handling The Doors Safely
We need to pay close attention to the mechanics when removing the doors. Use a 13mm socket wrench to remove the nuts from the bolts at the bottom of the doors. Make sure to disconnect the battery to prevent any electrical issues or accidental triggering of alarms.
Pro Tip: When lifting the doors, do so slowly to avoid any sudden drops or damage. Jeep doors can be heavy, so it’s recommended to have a buddy help you with the lifting. Ensure you’re in a stable position to avoid injuries.
Always double-check that the doors are fully unplugged before lifting to avoid accidents.
Storing The Doors
Once the doors are off, storing them correctly is crucial. A padded door hanger or a specific door storage bag works wonders in keeping the doors safe. By using padded hangers, we can prevent scratches and dents.
If space is an issue, consider wall-mounted storage solutions to keep the doors off the floor. This not only saves space but also prevents potential tripping hazards.
Pro Tip: Cover the electrical connectors with plastic covers or tape to keep them dust-free and in good working condition for when you reattach the doors.
By following these tips, we ensure that removing and storing our Jeep Wrangler doors is both safe and efficient. This helps keep our vehicle in top shape and ready for the next adventure.
We love what we do, and it shows in everything we do and more. We share our knowledge, here on Ran When Parked.
- Best Exhaust Tip for Deep Sound: Top Picks for 2025 - May 3, 2025
- Best Clear Coat for Headlights Reviewed: Top Picks for Enhanced Visibility - May 3, 2025
- Best Car Coffee Table Books for Auto Enthusiasts - May 3, 2025