2013 Ford Escape Oil Reset for Increased Accuracy!

Learning how to do a 2013 Ford Escape oil reset will be practical information to keep at hand since knowing the proper techniques to do so will help you a lot to maintain the longevity of your vehicle’s engine.

2013 Ford Escape Oil Reset

Once you have changed the oil, you will also need to reset the light, as this allows the car system to track the oil’s health accurately. That being said, you can learn how to reset the “oil change” light with much, following the methods detailed in the extensive guide below, and keep your engine performing the best it can!

How To Reset ‘Oil Change’ Light on Ford Escape Models From 2013 to 2020?

To reset the “oil change” light on Ford Escape models from 2013 to 2020, you need to turn the ignition switch to “ON” without starting the engine, press the accelerator pedal and release it quickly thrice, waiting for the oil change light to turn off, and turn off the ignition.

  • For 2013 Models

If you own a 2013 Ford Escape, you could have noticed that the oil change light on your dashboard periodically illuminates, reminding you that it’s time to change your engine’s oil and filter. The first step is to insert the key in the ignition. After doing this, turn it to the “on” position without starting the engine. This will allow you to access the vehicle’s computer system, which controls the oil change light.

Oil Change for Ford 2013 Models

The next step is pressing the accelerator pedal down to the floor thrice within 10 seconds. This action will activate the oil change reset procedure, causing the oil change light to begin flashing. It’s important to note that you must press the accelerator pedal down to the floor for the reset procedure to work correctly.

After you’ve completed the reset procedure, you’ll need to turn off the ignition and then start the engine to confirm that the oil change light has been successfully reset. If the oil change light illuminates again during your next oil change interval, repeat the reset procedure to ensure the light reflects the correct gap.

  • For 2014 Models

To reset the light on a 2014 Ford Escape, start by turning the ignition key to the “on” position without turning on the engine. Within ten seconds, depress the accelerator pedal three times to the floor. To initiate the reset process, you must push the accelerator pedal thoroughly and quickly within the specified time frame.

After you have completed the reset process, watch for the oil change indicator to begin blinking. This blinking indicates that the reset process has been successful. However, it’s crucial to confirm that the oil change light has been reset by turning off the ignition and starting the car.

  • For 2015 Models

Resetting the oil change light on a 2015 Ford Escape is a simple task you can carry out independently. Without starting the engine, turn the ignition key to the “on” position to get started. Next, press the accelerator pedal three times to the floor in ten seconds. When you begin the reset procedure, push the pedal firmly and fast within the allotted time.

After the procedure, watch for the oil change sign to start blinking. By switching off the ignition and testing the vehicle, you must ensure the oil change light has been reset.

  • For 2016 Models

Turn the key to the “on” position. You can start the reset procedure once the switch is in the “on” position. First, quickly and firmly press the accelerator pedal to the floor thrice in less than 10 seconds.

The oil change indication on your dashboard will start blinking when you have finished the reset procedure. This shows that the reset operation was successful. However, you must turn off the ignition and do a test start on the car to be sure the oil change light has been reset. The reset was successful if the oil change light did not come on after a successful reset.

  • For 2017 Models

Resetting the oil change light on a 2017 Ford Escape is a relatively straightforward procedure with just a few steps. First, press the “OK” button on the steering wheel until the “Settings” menu appears on the dashboard display. This will allow you to access the vehicle’s computer system, which controls the oil change light.

 

Next, you need to use the arrow buttons on the steering wheel to navigate to the “Vehicle” section of the Settings menu. Select the reset option from there and press the “OK” button. The reset function should now be activated.

Ford 2017 Models Oil Reset

Press and hold the “OK” button until the “Resetting Oil Life” message appears on the display. It is essential to continue holding the button until you see this message to ensure the reset procedure is completed successfully. After releasing the button, wait for the display to confirm that the oil change light has been reset.

  • For 2018 Models

Regarding Ford Escape models launched in 2018, you can start the reset procedure by pushing the “OK” button on the steering wheel until the “Settings” option is displayed on the car dashboard. Head over to the “Vehicle” tab and then pick the option for resetting the oil life using the arrow buttons on the steering wheel.

As soon as the message “Resetting Oil Life” displays on the display, press and hold the “OK” button. When the display indicates that the oil change light has been reset, all you need to do to finish up is let go of the control and wait.

  • For 2019 Models

If you need a way to reset the light on a 2019 Ford Escape, the first step is to locate the “OK” button on the steering wheel and press it until the “Settings” menu is displayed on the car’s dashboard. From there, you must navigate to the “Vehicle” tab and select the oil life option using the arrow buttons on the steering wheel. It is vital to note that the location of these options may vary depending on the specific model of the Ford Escape.

Once you select it, the display will show “Resetting Oil Life.” This is your cue to press and hold the “OK” button. Once the collection confirms that the oil change light has been reset, you can release the button and wait for the display to return to the main menu.

  • For 2020 Models

To reset the oil change light on a 2020 Ford Escape, press the “Settings” button on the infotainment display. This will allow you to access the vehicle’s computer system, which controls the oil change light. Select “Vehicle” and “Oil Life Reset” from there to activate the reset function.

Resetting Oil For 2020 Models

Next, press and hold the “OK” button until the “Resetting Oil Life” message appears on the display. It’s important to continue holding the button until you see this message to ensure the reset procedure is completed successfully. Once the message appears, release the button and wait for the display to confirm that the oil change light has been reset.

How To Know Why You Must Reset the ‘Oil Change’ Light?

To know why you must reset the “oil change” light, you should consult your vehicle’s owner manual or contact a trusted mechanic. The light may be triggered based on mileage or other factors, such as ensuring the best performance from your car.

  • Ensuring Optimal Performance

The change oil light on your dashboard is a critical reminder that it is time to change the oil and filter. The reason is to help you maintain your vehicle’s optimal performance and avoid potential engine damage that can result from neglecting routine maintenance.

  • Required Oil Change

When the light illuminates, it indicates that your vehicle is due for an oil change.

Ford Required Oil Change

By following the manufacturer’s recommended intervals for oil changes, you can ensure the engine stays well-lubricated, reduces wear and tear on engine parts, and prolongs the life of your vehicle.

How Often Should I Reset the TPMS on My 2013 Ford Escape?

The frequency of tpms reset methods explored for a 2013 Ford Escape depends on various factors. It is generally recommended to reset the TPMS system after a tire rotation or when you notice abnormal tire pressure readings. Regularly inspecting your tires and monitoring their pressure is crucial for optimal safety and performance.

Can I Use the Same Steps to Reset the Oil Light on My Ford Escape?

Yes, you can follow the same reset oil light Honda Civic steps to reset the oil light on your Ford Escape. By locating the reset button, turning the ignition on (without starting the engine), and pressing the reset button until the oil light blinks, you can successfully reset it.

Conclusion

Changing the oil on your Ford Escape is essential to maintaining your vehicle’s performance. Although each model year has a slightly different reset procedure, it’s relatively simple and can be done at home,

as you will once again see in the steps below:

  • To begin the process, turn on the ignition switch without starting the engine.
  • Press the accelerator pedal down to the floor three times within 10 seconds.
  • Wait for the oil change light to turn off.
  • Turn off the ignition, then start the engine to confirm the oil change light has been reset.

Remember to follow the specific instructions outlined in your owner’s manual and ensure that you are selecting the correct options in the Settings menu. That being said, remember to reset the oil change light on your Ford Escape the next time you change your oil and filter!

5/5 - (14 votes)
Ran When Parked